IV set
High safety and efficiency
BENEFITS
- No component assembly, streamlining workflow
- Permanently bonded, reducing the risk of disconnect, leakage and exposure
- Needle-free luer locking, complying with the National Institute for Occupational Safety and Health (NIOSH/Occupational Safety and Health Administration (OSHA) standards and improving nursing and patient safety
- Fewer parts, decreasing
- Requires no change to nursing protocol and workflow
- Passive locking mechanism, helps reduce leakage and exposure and preventing accidental leaks
- Seamless connection with valve integrated with Alaris pump tubing
- Available with low-sorbing tubing
KEY PRODUCT FEATURES
AirStop: an innovative, hydrophilic depth filter membrane ensuring AirStop safety in case of emptied fluid container. Maintains the tubing completely filled with fluid. Works further as a particle filter with a filtration efficiency of 15 µm and even lower. PrimeStop: a protective cap lined with a bacteria-tight hydrophobic membrane placed on the Luer Lock fitting, stops fluid leaking and protects against contamination. PrimeStop automates priming and ends messy dripping.
BASIC PRODUCT FEATURES
- Ergonomically designed 3-part drip chamber for comfortable, secure handling
- Advanced precise roller clamp
- Soft, clear PVC tubing with new type of safe plasticizer
PRODUCT SPECIFICATIONS
Components
- Spike or perforator
- Air inlet with air filter and protective cap.
- Drip-counting chamber.
- Flow regulator.
- Y-injection site
Perforator or Spike
- Materials: plastic ABS (Acrylonitrile Butadiene Styrene), POM (polyacetal), polystirole.
- Hollow device, double channel with sharp tapering cannulae, located at the proximal end of the IV set, ensuring a safe seal between the IV line and the fluid container (bottle or bag).
- Spike can be moulded as part of the infusion chamber or connected by non-kinking tubing.
Tubing
- Medical grade materials, PVC-based.
- Transparent (allowing bubble detection), supple and resistant to kinking.
- Minimum length: 150cm, giving the IV set an overall length of 170-180cm.
- ID 3mm, OD 4.1mm.
Material
The material components must not-modify the properties of the fluids or solutions passing through the infusion set .
Terminal Connection
- Male Luer lock, preferably mobile.
- Protection cap .
- With or Without a purging filter.
